Stephens Small Engine

SC2170 2 Inch Chipper/Shredder

The ECHO Bear Cat SC2170 chipper/shredder is the perfect match for homeowners who need to dispose of a variety of yard waste and wood material. With a chipping capacity up to 2” and shredding capability up to 3/4″, the SC2170 can handle twigs, small pruned limbs and leaves.

The SC2170 chipper/shredder is designed with the following features and options:

• 7 gauge steel housing

• Subaru SP 170cc engine

• Wide leg system for stability

• Two reversible, heat-treated chipper blades and four reversible shredding knives standard

• Option to add four additional shredding knives to rotor assembly

• Standard discharge screen has 1.13″ dia. holes

• Optional discharge screens: 3/4″ dia. holes for fine end material and slotted discharge screen for wet debris

SC3206 3 Inch Chipper/Shredder

The SC3206 chipper/shredder is powered by a 206cc Briggs & Stratton OHV engine. The 21 lb. rotor operates at 3600 rpm at full throttle. Two reversible chipping blades and eight reversible shredding knives provide the most efficient method of turning tree, yard and garden debris into nutrient rich, user ready product.

ECHO Bear Cat chipper/shredders use heat-treated chipping blades and shredding knives. The serrated edge shredding knives utilize a staggered pattern to maximize processing performance.

All ECHO Bear Cat chipper/shredders feature a changeable discharge screen system. The optional discharge screens provide the user control over end product size, depending on the intended use.

SC3265 3 Inch Chipper/Shredder

The SC3265 chipper/shredder is powered by a 265cc Subaru EX engine. The 27 lb. rotor operates at 3800 rpm at full throttle. Two reversible chipping blades and twelve reversible shredding knives provide the most efficient method of turning tree, yard and garden debris into nutrient rich, user ready product.

ECHO Bear Cat chipper/shredders use heat-treated chipping blades and shredding knives. The serrated edge shredding knives utilize a staggered pattern to maximize processing performance.

All ECHO Bear Cat chipper/shredders feature a changeable discharge screen system. The optional discharge screens provide the user control over end product size, depending on the intended use.

SC3306

The SC3306 chipper/shredder is powered by a 306cc Briggs & Stratton OHV engine. The 27 lb. rotor operates at 3600 rpm at full throttle. Two reversible chipping blades and twelve reversible shredding knives provide the most efficient method of turning tree, yard and garden debris into nutrient rich, user ready product.

ECHO Bear Cat chipper/shredders use heat-treated chipping blades and shredding knives. The serrated edge shredding knives utilize a staggered pattern to maximize processing performance.

SC3306E 3 Inch Chipper/Shredder

The SC3306 chipper/shredder is powered by an electric start 306cc Briggs & Stratton OHV engine. The 27 lb. rotor operates at 3600 rpm at full throttle. Two reversible chipping blades and twelve reversible shredding knives provide the most efficient method of turning tree, yard and garden debris into nutrient rich, user ready product.

ECHO Bear Cat chipper/shredders use heat-treated chipping blades and shredding knives. The serrated edge shredding knives utilize a staggered pattern to maximize processing performance.

All ECHO Bear Cat chipper/shredders feature a changeable discharge screen system. The optional discharge screens provide the user control over end product size depending on the intended use.

SC3420

The SC3420 chipper/shredder is powered by a 420cc Briggs & Stratton OHV engine. The 27 lb. rotor operates at 3600 rpm at full throttle. Two reversible chipping blades and twelve reversible shredding knives provide the most efficient method of turning tree, yard and garden debris into nutrient rich, user ready product.

ECHO Bear Cat chipper/shredders use heat-treated chipping blades and shredding knives. The serrated edge shredding knives utilize a staggered pattern to maximize processing performance.

All ECHO Bear Cat chipper/shredders feature a changeable discharge screen system. The optional discharge screens provide the user control over end product size, depending on the intended use.

CH45540 4.5 Inch PTO Chipper

The ECHO Bear Cat CH45540 is the perfect match for your compact tractor. It’s built with heavy-duty, 7-gauge steel. The 14 x 1 inch thick, 49 pound dynamically-balanced rotor utilizes two reversible heat-treated chipper blades and is driven by a double-banded belt for maximum power transfer. The cantilever mounted rotor design helps reduce wrapping while chipping wet, stringy wood types.

Also available is an optinoal 4.5 x 4.5 inch truckloading discharge chute with deflector cap. This optional chute directs the chips and raises the discharge of chips into the trailer or back of a pickup.

*NOTE – For Use On Tractors with PTO Horsepower Ratings From 15 hp to 28 hp

SC5540 5 Inch PTO Chipper/Shredder

If you have more acreage, you need more power to keep up with tree clearing, trimming and debris handling. Which makes the SC5540 the perfect machine for the job.

ECHO Bear Cat’s 125 pound balanced rotor and 4 reversible chipper blades have a well-deserved reputation for converting mounds of tree branches into mounds of mulch and compost material.

Equip your new SC5540 chipper/shredder with optional 1-speed  or 2-speed blower systems and it will pile the material where you want it.

Because the optional blower discharge chute rotates a full 360 degrees and is equipped with an adjustable deflector cap, precision placement of wood chips can mean filling up a pickup box, trailer or wagon for quick clean up and less labor.

*NOTE – For Use On Tractors with PTO Horsepower Ratings From 25 hp to 45 hp

CH450H 4.5 Inch Chipper

ECHO Bear Cat’s line of skid steer chippers attach in seconds and are driven solely by your skid steer’s hydraulics. They are available in standard models. Either model will make short work of any troublesome debris. • Continuous chipping size rating refers to the suggested feeding size of limbs for normal operation • Requires 11-15 gpm flow

CH4400 4 Inch Chipper

The ECHO Bear Cat CH4400 chipper is powered by a 404cc Subaru EX Engine. The 49 lb. rotor is equipped with two oversized, heat-treated chipping blades and rotates 3000 rpm at full throttle. The rotor is driven by a heavy-duty, double-banded belt, for maximum positive power transfer.

The CH4400 wood chipper features a cantilever disc mounting design which assists in decreasing the amount of material wrap that can occur with certain stringy, sappy or wet wood types. It has a 4-sided adjustable anvil as well to insure chipping quality and quality end product.

This compact and powerful chipper is perfect for the first time chipper buyer, small acreage owner or rental application.

CH5540H 5 Inch PTO Chipper

If a 5 inch PTO chipper is what you need, ECHO Bear Cat has just the right machine for you. You choose the model based on your power requirements.

The CH5540H both comes equipped with a 20 x 1.25 inch, 140 pound, dynamically balanced steel rotor with four reversible chipper blades, easy feeding with a big 27 inch x 28 inch feed hopper and 5.5 inch x 7 inch chipper throat opening that allows small side limbs, 360 degree rotating 6 inch discharge chute.

*NOTE – For Use On Tractors with PTO Horsepower Ratings From 25 hp to 45 hp

SC5540B 5 Inch PTO Chipper/Shredder/Blower

Get the job done and into the truck quickly and easily with the SC5540B! Heavy-duty construction, the SC5540B PTO 3 point hitch chipper/shredder weighs 720 pounds, this means years of dependable service. The double-banded belt drive gives a more positive transfer of power.

A great machine to move from job to job, the SC5540B is the machine landscapers and golf courses trust to clean up, move debris and make mulch. A manual-feed chipper/shredder without a screen reduces plugging, especially with damp material. The 18 x .75 inch thick, 145-pound dynamically-balanced rotor is equipped with 4 reversible chipper blades and 36 shredder knives.

*NOTE – For Use On Tractors with PTO Horsepower Ratings From 25 hp to 45 hp

CH8540 8 Inch PTO Chipper

Power take off on utility tractors have become a primary source for much of the work around farms, orchards, golf courses, etc. Any place where you need to turn a pile of branches into a pile of chips.

You choose – self feed or hydrostatic hydraulic feed for infinite feed settings – these chippers mount on your three point hitch and hook directly to the PTO for quick setup and power on demand.

Rotating 360 degrees, the 8 inch round discharge chute gives you accurate control over the flow of chips produced. The 30 x 1 inch thick, 275 pound dynamically-balanced disc, adjustable 4-sided anvil, four reversible chipper blades. The feed roller on Model CH9540H is 15 inches in diameter, containing 10 knife blades for enhanced powerful feeding. A hydraulic jack is mounted on the hydraulic feed system for ease of maintenance. Plate steel construction means solid performance for hundreds of hours, and maintenance is enhanced by a hinged disc cover that provides wide open access to the chipper blades and disc.

NOTE – For Use On Tractors with PTO Horsepower Ratings From 35 hp to 60 hp

SC5720B 5 Inch Chipper/Shredder/Blower

The SC5720B chipper/shredder/blower is powered by a 720cc Subaru EH engine. The 121 lb. rotor turns 2000 rpm at full throttle. This chipper/shredder uses four reversible chipping blades and thirty-six shredding knives to provide the most efficient method of turning branches and leaves into nutrient rich, user ready product.

ECHO Bear Cat chipper/shredders use heat-treated chipping blades and shredding knives. The thirty-six serrated edge shredding knives utilize a staggered pattern on the rotor shafts to maximize processing performance.

The SC5720B discharges processed material through a 360 degree rotational discharge tube. This truckloading feature is accomplished with integrated rotor blower paddles which “blow” the processed material through the discharge tube. Processed material size from the SC5720B is controlled by a unique screenless shredder system. The screenless system controls the amount of air flow to the housing and rotor. Less air = more time material stays in housing and is processed smaller before being discharged; More air = larger processed material and more readily discharged.

CH5653 5 Inch Chipper

With the reliable ECHO Bear Cat CH5653 Chipper, taking care of tree limbs and prunings is quick and simple. Tree services and landscaping companies use the CH5653 chipper for jobsite cleanup, power line clearing and easement cleaning. With the road towable hitch, the CH5653 has “go anywhere” usability.

The CH5653 Chipper is built with a double-banded belt drive that ensures equal transfer of power from the engine to the chipper blade, increasing the disc speed allowing the operator to chip more material at a faster pace. The CH5653 Wood Chipper is also equipped with a 653cc Subaru EH Engine that provides smooth, reliable torque throughout the rpm range and low fuel consumption.

The CH5653 model is designed with a range of features and options that include; flip up jack stand that ensures machine balance during machine operation, highway towable mobility allowing this chipper to be transported to a number of worksites easily and a rotating discharge chute, letting the operator choose the direction of the discharge materials. Also, a CE compliant version is available

CH6720H 6 Inch Chipper

This 6″ capacity commercial chipper is hydraulically fed and features a distinctive 6.5 x 13 inch wide feed opening to accommodate larger brush and tree trimmings. It is powered by an electric start, 720cc Subaru engine for reliable starting, more horsepower, reduced fuel consumption and long life.

The CH6720H also features a unique cantilever mounted rotor. This “propeller” style mounting design allows a user to chip wet or stringy wood types with less tendency of product twist or wrap.

The chippers’ hydraulic feed system is electronically controlled. If the rotor speed drops below optimal operational RPM range, the controller pauses the feed roller to allow the rotor to regain speed, and then restarts feeding once optimal rotor RPM is achieved. This AutoFeed function allows for less fatigue on wear parts and maximizes efficiency.

The CH6720H’s 165 lb. rotor comes equipped with four reversible, heat-treated steel chipper blades. The four-sided striking anvil is adjustable, allowing for the blades to maintain a sharper cutting edge longer and reduce repairs and blade replacement costs.

The CH6720H is a great fit for tree and landscape service operators as well as the perfect mid-size chipper for municipalities and rental companies.

CH8720iH 8 Inch Chipper

The ECHO Bear Cat CH8720iH is an industry unique chipper that comes with a range of features that will get any job done.  The 8” Turntable Chipper features a Subaru Electronic Fuel Injected engine for greater power, high altitude operation, fast recovery time and increased fuel efficiency. The turntable design allows the operator to turn the feed hopper closer to the material or away from hazards, like road sides. This model is equipped with hydraulic feed and feature ECHO Bear Cat’s Smart Feed System. The Smart Feed System speeds up the job by automatically feeding and adjusting the feed rate without operator intervention. This will allow the operator to load more material and be able to move onto the next jobsite quickly.

CH8993H 8 Inch Chipper

The 8 inch turntable chippers from Bear Cat provide all the features you need to get your work done!

The 360 degree rotating base allows the chipper infeed to be rotated to the work. An integrated smart feed system allows efficient use of the engine horsepower. A swing-away door covers the belts and hydraulic system during operation, and opens quickly for service.

CH611DH 6 Inch Chipper

Invest in the chipper that’s loaded with new standard features to make your job easier. Our new breed of chipper can handle branches up to 6 inches in diameter, with the ability to chip the toughest brush with ease.

The 26 x 1 inch thick, 165 pound dynamically-balanced disc with cantilever design reduces wrapping while utilizing 4-reversible chipper blades, and an adjustable 4-sided anvil.

Features include a 6.7 inch rectangular discharge chute, and a live hydraulic feed system with a variable speed feed roller with instant reverse. Our Auto-feed feed system automatically retries feeding limbs. The feed sensor is factory installed and standard equipment on the CH611DH. The feed roller is 15 inches in diameter for enhanced powerful feeding. The discharge chute extends to the end of the hitch for efficient loading and quickly rotates 360 degrees with ease. The CH611DH has a 6.5 x 13 inch feed throat opening with a wide open feed chute mouth measuring 36 x 35 inches.

The triple banded belt drive provides a better transfer of power. The ECHO Bear Cat CH611DH also features a telescopic tongue with 2 inch ball coupler, torsion axle suspension, adjustable jack stand with wheel and adjustable rear stabilizer.

CH911DH 9 Inch Chipper

There isn’t much that can stand up to the mighty ECHO Bear Cat 9 inch chippers. Based on solid 4 inch “C” channel frame with torsion axle suspension, these machines make branches and trees up to 9 inches in diameter disappear. Features include a 15 inch diameter feed roller containing 10 knife blades, four reversible chipping blades, adjustable 4-sided anvil and an 8 inch round discharge chute.

The 30 inch diameter, 1.25 inch thick dynamically-balanced chipper disc weighs 275 pounds and producing tremendous chipping power.

A triple banded belt drive generates positive power, and a hydrostatic feed control provides the operator with infinite feed settings for all types and sizes of debris. A telescoping tongue along with torsion axle suspension makes towing easy. Service and maintenance is made easy by a hinged disc cover.

With 18 gallons in the fuel tank, you’ll create piles of chips between refills.